CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
(10 reviews)
Price: $29.86
In Stock
CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
Item # CE14035G40
Our Price: $29.86
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (10)
- Q & A (0)
- Photos
CE Smith Accessories and Parts - CE14035G40
- Trailer Suspension Parts
- Brackets
- CE Smith
Heavy-duty hanger can be configured to work as either a front, center, or rear hanger in your trailer's double-eye leaf spring suspension setup. Galvanized steel construction is great for marine use. Designed to bolt onto your trailer frame.
Features:
- Heavy-duty hanger bracket suspends a leaf spring from your trailer's frame
- Provides attachment point for front or rear of a double-eye spring, or for an equalizer on tandem-axle applications
- Bolt-on installation - no welding required
- Attaches to the underside of your trailer frame
- Mounting hardware not included
- Flat top keeps bracket flush with trailer frame to limit wobbling
- Galvanized steel resists rust and corrosion
- Suitable for freshwater or saltwater use
- Made in the USA
Specs:
- Inside width: 2"
- Overall dimensions: 6" long x 3" wide x 3-3/8" tall
- Diameter of shackle bolt hole: 9/16"
- Diameter of mounting bolt holes: 9/16"
- Distance between mounting bolt holes (center to center):
- Holes nearest to each other: 1-5/8"
- Adjacent holes on opposite sides: 4-3/4"
- Quantity: 1 bracket
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
14035G40 C. E. Smith Heavy-Duty Hanger Bracket for Single or Tandem Axle Trailer Applications - Galvanized Steel
California residents: click here
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On - CE14035G40
Average Customer Rating: 5.0 out of 5 stars (10 Customer Reviews)
Heavy-duty hanger can be configured to work as either a front, center, or rear hanger in your trailer's double-eye leaf spring suspension setup. Galvanized steel construction is great for marine use. Designed to bolt onto your trailer frame.by: Jarrett04/30/2022
This will work just great for moving my trailer axle. I will have to modify this slightly so I can place u-bolts over the bolt-on flange to attach it to the trailer.
by: Capt. Bob L.09/23/2021
Exact fit, prompt service, good pricing. I would use etrailer again for parts.
by: Richard H12/11/2021
Excellent quality. Very sturdy hanger. Exactly what I was looking for. I can always count on etrailer for their products, quick shipping, and excellent customer service.
by: Jorge 10/01/2022
Fast delivered and product just as desc ribed
by: Paul 07/27/2022
Worked perfectly. Just exactly what we ordered.
by: Mako10/31/2021
Heavy duty. Nice coating of zinc.
by: Curtis01/06/2022
All the correct parts needed and at reasonable prices. Was delighted to find these people!
by: Jose 07/01/2021
It was just what I was looking for great product
by: Lee 04/15/2023
by: Mason 10/29/2022
10
10
See what our Experts say about this CE Smith Accessories and Parts
- New Hangers for my TrailerI've got a solution for you. Unfortunately the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - part # CE14026G you looked at aren't going to work. I measured the mounting hole on it and they are on 1 9/16" centers which means half of each hole will be covered by your trailer frame. I then checked out CE Smith Front/Center/Rear Hanger part # CE14035G40 and those hoes are on 1 5/8" canters still no good for your application. After some brainstorming I came up with two options...
view full answer...
- Does CE Smith Trailer Suspension Hanger Have Weight CapacityThe CE Smith Front/Center/Rear Hanger Bracket # CE14035G40 does not have a weight rating. It basically will have the weight capacity of any leaf spring that will fit it.
view full answer... - Replacement Hangers for Single Axle TrailerThe only hanger kits we have that are bolt on are the # CE14035G40 and # CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers. For replacement hangers you want to choose the same size you currently have. The width will always be 1-3/4" so you will need the height which is the distance from center of bolt hole to the top of the hanger. The same is true for shackles. The # APS3 has 1-1/2"...
view full answer... - Compatibility of Trailer Suspension Hanger on 2 x 2 Inch FrameThe CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On # CE14035G40 measures 3 inches wide and the center on center bolt holes are 1-5/8 inches. Because of this it will not fit and you would instead need the weld on Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole # 28-5.
view full answer... - What Size Bolt-On Leaf Spring Hangers Are AvailableWe only have 2 options for bolt-on hangers: - CE Smith Front/Rear Hanger Bracket for Double-Eye Springs # CE14026G which have an inside width of 1-1/4" - CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs # CE14035G40 which have an inside width of 2" Typically with leaf springs that measure 1-3/4" you are using a bracket like the Front/Center/Rear Hanger for Double-Eye Springs # 115918 which has an inside width of 1-7/8" not 2". But this is a weld on option which won't...
view full answer... - What Diameter Shackle Bolt Hole Does CE Smith Hanger CE14035G40 HaveThe CE Smith leaf spring hanger part # CE14035G40 that you referenced has 9/16 inch diameter holes for the shackle bolts which is the standard size so it would work well for you and would not require any drilling.
view full answer... - Dimensions of CE Smith Front/Rear Hanger Bracket # CE14035G40I checked with CE Smith and they gave me the following dimensions for the hanger part # CE14035G40: 7 gauge galvanized steel 4-1/4" long 2-1/4" high Inside width of 1-7/8" Outside width of 2-1/4" Use with 9/16" shackle bolt
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.